DIY: Burlap Placecards

Can you see a theme in my recent posts? Burlap, folks. I'm obsessed with it right now.

For Thanksgiving, I wanted to make my own place cards instead of going out and buying them.

For this craft, I used:

• Hot glue gun & glue sticks
• Card stock
• Scissors
• Felt Pens
• Ruler
• Scorer/Box Cutter/Credit Card
• Burlap (or whatever you want to embellish your place cards!)

I cut the card stock paper in 3in x 3 1/2in rectangles. I got about 6 place cards per 8x11in paper.

I then marked the halfway point on the 3 1/2in side, which is 1 3/4 in.

I then scored it across using my cutter/scorer template (Martha Stewart from Michael's). If you don't have one, you could lightly score the place card with scissors, bow cutter, or a credit card.

I then wrote out the names of my guests and then folded the place cards. Then, I cut little squares of burlap and then folded them in half. 

At this point, you could customize your place cards with whatever you'd like! For instance, I made my own place cards for my wedding and embellished them with buttons in our wedding colors:

(Aren't they super cute!?)

Okay, let's get back to business!

I took my hot glue gun and put it inside the burlap and then glued them on the place cards! They turned out so cute!

If you end up making your own -- let me know and share a picture!

DIY: Burlap Napkin Ring

I just bought napkins for the Thanksgiving meal Will and I will be hosting -- but I just couldn't find napkin rings that I liked enough to buy. I called my friend Aly who suggested I make them from paper towel rolls! I love that girl - she is so creative!

After some trial & error, here are my finished napkin rings:

Supplies:

• Burlap, or fabric/ribbon
• Glue gun & glue sticks
• Marker
• Tape measure
• Box cutter
• Scissors
• Paper Towel Roll

I started by marking the paper towel roll at 1 inch intervals.

All marked up!

Before I cut the rolls with my scissors, I had to make a small incision with a box cutter.

After making the incisions, the roll was super easy to cut.

The roll yielded about 11 rings.

I cut about 3/4 inch wide chevron burlap ribbon about 20 inches long.

I started by putting a dab of glue inside the roll.

I then placed the ribbon inside and made sure it was secure.

I then wrapped it around, making sure it was tight.

Then I added another dab of hot glue and continued to wrap the roll, overlapping just a little.

All done!

They are the perfect size for the napkins!

I tried different burlap fabric I had. I found that the burlap that had a painted print held better than plain burlap. 

I think it would be so cute to make these again but with a solid ribbon color and then add buttons!

They looked amazing on the napkins! 

And the cost? Practically nothing! I had all the supplies at home :)

If you make your own, let me know how they turned out! Feel free to include pictures!

DIY: Burlap Table Runner

My long table was looking drab for this beautiful Fall season so I decided to spruce it up!

I bought 12 in x 15 ft brown burlap, 5 1/2 in x 15 ft red burlap, and a beautiful chevron brown & red burlap ribbon. 

I ran the burlap across the table and cut the brown and red ribbon so they were the same length. The overhang was about 8-12 inches. I then cinched and tied a bow at each end.

Love it!

If you make your own table runner, share your before & after pics!

Burlap Chevron Wreath

While browsing Pinterest lately, I had the crafting itch. So I scratched and went to Hobby Lobby. I've been wanting to put a wreath on our front door for awhile, and I wanted to put my touch on the design. 

Here's the end result with directions following:

I bought a large wreath metal template, 4 in x 30 ft burlap ribbon, 4 in x 15 ft chevron burlap ribbon, floral wire, floral accessory, and a letter "D" for Davis! I also grabbed a pair of scissors for this project.

To start, I secured the burlap ribbon to the inside metal ring with the floral wire.

I then weaved the burlap through the inner and outer metal rings. I went back and forth 2-3 times per interval.

I finished going around and then "fluffed" the edges by pulling the folds apart.

All fluffed up! Gideon was taking a little cat nap while I was crafting!

Then I got started on the chevron inside ribbon detail. I took floral wire and secured the ribbon the same spot I secured the first ribbon. I then took about a 2 in long piece of floral wire and poked it through the ribbon about an inch from the sides. 

At each "interval" I pinched the ribbon and wire to secure it to the metal wreath.

I twisted the ends at the back of the wreath.

After finishing, I secured the floral accessory to where the ribbon ends met. This covered any unsightly parts of the wreath.

I wanted to hang the letter "D" to the wreath, so I cut out a strip of the chevron ribbon and looped it in the letter.

I laid it where I wanted it placed and secured it to the metal frame with the floral wire.

All done!

It looks great on the front door! So perfect for Fall!